| Unclean singeing | cause | resolvent |
| The inner flame is too far from the cloth and the temperature of the copper or cylinder is not enough | To adjust the height of an inner flame over or raise the temperature of a copper plate or cylinder. | |
| speed too fast | Slow down the speed | |
| Drying drum and brushing device didn't work | Clean brush with Emery roller, adjust contact surface with fabric,improve drying effect | |
| Excessive singeing | The temperature is too high, the fabric is thin, the burner is many | Adjust flame temperature,adjust the number of singeing surfaces |
| speed too slow | Strengthen the blowing cooling between the burners | |
| Improve the speed | ||
| uneven singeing | Burner blockaged, deformation, uneven surface of copper plate or cylinder | To clear or flatten the iron plates on either side of the opening. |
| Inconsistency of temperature at both ends of copper or cylinder | Improved operation | |
| Cloth wrinkle | Adjust the feed tension guide roll to keep the edge holder flexible | |
| Burning hole | Scouring sand, flanking sand, cotton wool, not extinguishing in time | Shortening the distance between Fire and Fire extinguishing |
| Gasoline is badly gasified and oil droplets are sprayed on the cloth | Replace atomization nozzle or raise gasification temperature | |
| speed too slow | Improve the speed | |
| Mars fell on the cloth and didn't go out in time |






